| This project is not completed yet - Last update: January 12, 2014 |
PAGE 4 of 4
Fixing the heat gun on the carriage
Its time to mount the payload, the heat gun. As expected, the heat gun will be placed in the semi-cycle cut of the carriage. But first i need something to hold the gun:
 |
 |
 |
 |
| I piece of aluminum will do the work |
First i bent the aluminum to the shape of the heat gun handle |
This is what i want, an Omega shape |
Then i trimmed the edges, drilled for the screws and routed the counter-sinks. |
Here is how it looks now:
 |
 |
| Carriage is Down |
Carriage is Up |
A much better coupling for the motor and rod
In the previous pages when i was describing how the threaded rod is coupled onto the motor, i said that i decided to use a much better method than the metallic part of a klemens. This coupling had the shaft completely misaligned with the motor shaft. This caused extreme vibrations and extreme torque on the motor, causing the motor to move like it was dancing. It required a lot of work to "somewhat" align the shafts. So i decided to change this lousy coupling.
It just so happens that the motor and the threaded rod has almost the same diameter. This helps a lot. What i need is something to couple the two 6mm shafts together, and that something is an 8mm air hose:
 |
 |
 |
| The motor shaft and the threaded rod have almost the same diameter, 6mm |
This is the coupling, an 8mm air hose. The internal diameter is roughly 6mm! |
I only need one short piece of this tube |
And here it is!
It works extremely well! I totally recommend this method if speed and torque permits.
Stay tuned. I will upload more worklog soon!
Comments
At 1 February 2014, 13:52:38 user infringer wrote: [reply @ infringer]Wow actually your website has an amazing list of products you are quite the enthusiast to be honest I am very impressed with your work!
As a first time viewer I have this website bookmarked!
Yes I agree you do provide solutions many of them actually. This solution in some ways is superior to my first incantation of an adjustable holder mine was simply going to be threaded rod with a base plate two nuts and washers with a metal tube between them and a set screw to fix the axis to keep it steady from rotation I may still do this to allow for 360 degree range of movement it will be very cheap dirty and simplistic by no means will it be a Cadillac either.
by the way my website is http://www.mopowah.com I have zero members really and I am not worried the least by it eventually I will contain enough content for anyone to deem worthy but I have a vision that just seldom works in principal for my web forum is expansive I do not focus on one area or niche. This most often always results in failure. I would like to will everyone to think outside of the box and be a little less niche based.
The #1 reason behind this theory to collaberate rather than focus on a singular effort is because all great breakthroughs are resultant on ideas from all different topics. There was a discovery channel show that aired showing some of these connections to educate the public on this very thing I was hoping that the idiot box would educate them enough to derive the same conclusion and become a member of my more expansive forum while it has not worked out I presume that with continued effort it will be a birthing ground for great ideas I continue to invest my time and my money every month in hopes that some day that I can operate solely on donations from my many members and possibly amazon based links that are hand inserted and 100% topic related.
At 1 February 2014, 13:17:54 user Giorgos Lazaridis wrote: [reply @ Giorgos Lazaridis]@infringer Hello! Criticism is always welcomed. I began this project to do some of my jobs easier. Meanwhile, i expect for my 3D printer which will change the face of this site radically if you know what i mean. All of my projects aim to give ideas and not 100% solutions. Why? simply because a creative mind needs only ideas to create solutions. Nevertheless you have a point here, it could be more universal.
And of course you can post it in your site (which is???). Remember to add those links to this page ;)
At 1 February 2014, 12:59:06 user infringer wrote: [reply @ infringer]I love the project I have the Chinese model of this hot air station along with a digital thermometer I have been looking for a way to do exactly what you are doing right now. However I do have some reservations to this work the motor is one of these reservations or modifications with it being free mount is it not possible to do say a belt drive or chain drive to provide lift?, I would likely shield all wood with aluminum foil tape,also is there a way to mount the slides on the back and the motor on the back to keep them sealed from heat as the lubricants would easily dry up after the heat is applied in the locality of the unit this to me is important. I would also like to see better thought to go into making this a more universal project. Three things to me that make this project not so universal are, The fact that the fastening rings are not universal this is extremely important for open source developments I suppose it is semi adaptable with different sized clamps but, something that is there that you adjust would be much better for a final build not to insinuate that this was a final build or bad build it is just friendly criticism. Another thing is the extension of the gun away from the frame no two boards are alike for them larger boards it is important that there is ample distance from the frame to allow at the very least an EATX Motherboard for instance maybe a bit more to be safe to fix some PCB's for things like HVAC type stuff or homebrew boards where people are just starting off and really prefer space between their components for optimal understanding due to improved visualization. Finally I would like to see a universal and adjustable mounting system for a digital thermometer or an IR thermometer (While in my case I have found IR based thermometers to be inaccurate on measuring chip surface temps due to reflections or something on a metal surface one could estimate or approximate the temperatures but at times it seems if your results are null when attempting a reflow at proper temps. After enough money invested in IR I suggest digital thermometers as the way forward for reflow.
I would love to reflect and assure you of one thing it is much easier to be the critic than the builder but a critic whether it is self induced or not will most often result in major improvements in any project.
Finally this project to me is a 7 of 10 stars all improvements included or aside it is an excellent project I would love to have permission to have rights to this information to post it on my website if possible.
At 10 January 2014, 12:20:18 user Giorgos Lazaridis wrote: [reply @ Giorgos Lazaridis]@Stephen Leister is not near the top quality manufacturers in EU, its (according to my know,ledge and experience) THE top manufacturer. Which has also not nearly the highest price, but THE highest price. I repaired once a 1400W triac-less heater. Had a dead heating element (it works in a factory 24/7 and the air intake was stuck). The price of the heater was more expensive than half the price of the whole aoyue 968. If you know what I mean...
When business runs like the river, i will equip my lab with expensive tools. But the first expensive tool will be the multimeter (check) and the oscilloscope (comming up next).
At 10 January 2014, 12:02:42 user Stephen wrote: [reply @ Stephen]Hello Giorgos,
I have no idea how this unit fares price wise against the heat gun you are currently using but should you ever plan to buy another, this is the One... the Leister Hot Jet S with 5mm nozzle. I have used this product since 1994 [not the same unit] for all SMD Development and Rework including PLCC [up to PLCC84] and QFP [up to QFP208] devices . I highly recommend this excellent and highly reliable product. No, I don't work for them... He He...
All the best
Stephen
Das Link:
http://www.leister.com/en/plastic-welding-product.html?catalog=1b301b71-fc43-4641-8ef0-506387c3ebfd&subcatalog=&product=f33197fc-95bd-4f1c-a2ae-feefd0862466&view=sparepart |
|
 HOT in heaven!
|
|
Home
Projects
Experiments
Circuits
Theory
BLOG
PIC Tutorials
Time for Science
Contact
Forum
RSS
Reddit this
NEW in heaven!
